Budnick Converting ®
3M
405
Splicing Tape
405 is a 3mil, repulpable, double-coated tape, primarily used for overlaping splices in cellulosic materials. It is tissue coated on both sides with a light green repulpable adhesive. Sealed plastic bags help assure constant moisture content of unused tape. Adhesion to paper increases after short dwell time. Water solubility and alkali dispersability are excellent and eliminate danger of contaminating the paper mill broke by non-repulpable material.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Tissue |
|---|---|
| Adhesive | |
| Thickness | 3 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | |
| Adhesion (unwind) |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp | 400° F |
Product Features
- Adhesive=light green repulpable
- Repulpability=tape-completely;Liner is not repulpable
- Bond strength=excellent affinity to cellulose fibers and starch coatings
- Heat resistance=up to 400°F (204°C) web temperature
- Repulpable adhesive
- Prevents broke contamination by non-repulpable splice material
- Helps increase value of waste paper
- High shear strength
- Reduces exposed adhesive caused by splice slippage at high web tensions
- Helps reduce web breakage caused by "blocking"
- High temperature
- Can withstand high oven temperatures
- Helps reduce down time due to splice failure
Adhesive Tape Applications
- Overlap splices in cellulosic materials
- High temperature overlap splicing of many foils, plastic films and papers
- Used in paper mills and paper converters
- General web handling
Adhesive Tape Colors
- Light Green
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.