Budnick Converting ®
3M
9453LE
Laminating Adhesive
A 3.5 mil. laminating tape featuring 300LSE hi-strength acrylic adhesive on a polycoated liner used for nameplates, graphic overlays, membrane switches and identification material. When 9453LE tape is properly applied, nameplate and decorative trim parts will hold securely after exposure to numerous chemicals including oil, mild acids and alkalis. The bond strength increases as a function of time and temperature and offers very high initial adhesion.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 100 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 300° F |
| Max Long-Term Temp | 200° F |
Product Features
- 5.0 mil. 300LSE high strength acrylic adhesive (solvent free)
- 4.0 mil. liner
- Excellent bond
- Excellent adhesion
- Extremely smooth
- 90° peel adhesion to ABS: 113oz./in.
- 90° peel adhesion to polypropylene: 103oz./in.
- Very high bond strength to most surfaces
- Excellent bond to low surface energy plastics
- Excllent adhesion to lightly oiled surfacs
- Use on smooth, rough and textured surfaces
- Excellent graphic appearance
Markets Served
- Appliance
- Signage, Banners, & Printing
- Industrial
- Automotive
Adhesive Tape Applications
- Plastic nameplates or graphic overlays on low surface energy plastics
- Waste removed nameplates on a common sheet for ease of application
- Attaching membrane switch assemblies to powder coated surfaces and low surface energy plastics
- Graphic overlays with end tabs for easy liner removal
- Graphic application to surfaces such as wood, fabric and plastic, where very high bond strength is required
- Attaching indentification material to lightly oily surfaces typical of machine parts
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.