3M
9824
Double Coated Tape
A 3.1 mil. double coated tape featuring 340 adhesive coated on both sides with a polyester backing used for general purpose laminating. 9824 is also a member of the 340 acrylic adhesive family. 340 is a medium-firm acrylic adhesive which provides a combination of high initial adhesion and good shear holding power to a wide variety of materials, including many plastics and foams. This tape is available with a thin polyester film or a tissue for dimensional stability to foams and other substrates, and improved handling during slitting and die-cutting. 9824 tape is not recommended for high temperature or high shear performance applications. For such applications, please refer to the 350 and 300MP adhesive product families. See 3M data sheet for Application Equipment: Dispenser Selection.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Backing/Carrier | PET - Polyester |
---|---|
Adhesive | Acrylic |
Thickness | 3.1 Mils |
Tensile | |
---|---|
Elongation | |
Adhesion (liner) | 54 oz/in |
Adhesion (unwind) | 54 oz/in |
Min. Application Temp | 50° F |
---|---|
Min. Service Temp | 0° F |
Max Short-Term Temp | 150° F |
Max Long-Term Temp | 120° F |
Product Features
- 0.5 mil. polyester backing
- 1.3 mil. acrylic adhesive coated on both sides
- 3.2 mil. white, paper liner
- 180° peel adhesion to stainless steel: 67oz./in.
- 90° peel adhesion to ABS: 49oz./in.
- 90° peel adhesion to polycarbonate: 49oz./in.
- 90° peel adhesion to polypropylene: 32oz./in.
- Shear strength: 1000 gms at 72°F for 142 min.
- High initial adhesion
- Good shear holding power
- Improved handling
Adhesive Tape Applications
- General purpose foam lamination
- General purpose lamination for fabricated parts
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.