SearchProducts (15 Results)
Showing 15 of 15 results
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | |
Foam Seal 70P UL is a low density industrial PVC foam tape formulated to conform to UL HF-1/HBF* and is a recognized component of Underwriters Laboratories. It has an acrylic adhesive and is used for general air, dust, and moisture seal gasketing and sound damping.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 110.5 Mils |
Adhesion | |
BT99060 is a 110.5 mil non-lead loaded solid polyvinyl chloride with an adhesive coated PET film backing. It is used for sound damping.
Backing/Carrier | Aluminum |
---|---|
Adhesive | |
Thickness | 15 Mils |
Adhesion | |
This sound damping product consists of a room temperature pressure-sensitive viscoelastic polymer on a dead soft aluminum foil, designed to reduce noise from resonance induced vibrations in sinks, panels. support members.and other structure born noise.
Backing/Carrier | Aluminum |
---|---|
Adhesive | Rubber |
Thickness | 7.5 Mils |
Adhesion | |
A 7.5 mil. pressure-sensitive rubber adhesive tape, coated on a dead soft aluminum foil backing used for application to panels and steel support member for vibration damping purposes.
Backing/Carrier | Aluminum |
---|---|
Adhesive | Rubber |
Thickness | 13.5 Mils |
Adhesion | |
A 13.5 mil. pressure-sensitive rubber adhesive tape, coated on a dead soft aluminum foil backing used for application to panels and steel support member for vibration damping purposes.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | |
*** Discontinued see Novagard 70PUL** 65SC.25 is a 1/4" thick, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. Meets UL 94 HBF.
Backing/Carrier | Aluminum |
---|---|
Adhesive | Rubber |
Thickness | 17.5 Mils |
Adhesion | |
A 17.5 mil. pressure-sensitive rubber adhesive tape, coated on a dead soft aluminum foil backing used for application to panels and steel support member for vibration damping purposes.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | |
***Discontinued see Novagard 70P UL***65SC.50 is a 1/2" thick, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. Meets UL 94HBF.
Backing/Carrier | Nitrile |
---|---|
Adhesive | Acrylic |
Thickness | 128 Mils |
Adhesion | |
***Non-stock check availability***AP254M is a Nitrile/PVC blend foam coated on one side with a 3 mil polyester film with acrylic adhesive. This product is used for sealing and sound damping.
Backing/Carrier | Aluminum |
---|---|
Adhesive | Rubber |
Thickness | 45 Mils |
Adhesion | |
360-45 is a 45mil, aluminum foil, all weather duct tape, primarily used for instant water tight bonds.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | |
Foam Seal Aluma-Seal 723 is an industrial medium density PVC foam product cast on an aluminum liner. AlumaSeal 723 is a PVC foam with an aluminum covering on one side and acrylic adhesive on the other side. Product is UL listed from 1/16" to 1/4" thickness with an acrylic PSA.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | oz/in |
V612-FR consists of closed-cell PVC foam permanently cast on heavy-duty aluminum foil. Vyn-Alum acts as an effective insulator and prevents condensation or moisture build-up on surfaces to which it is applied. V612-FR is a special formulation that meets Building Materials Specification FHC 25/50 flame and smoke spread index (UL 723 Test Method).
Backing/Carrier | Aluminum |
---|---|
Adhesive | Acrylic |
Thickness | 15 Mils |
Adhesion | |
***Discontinued*** Avery Dennison Damping Foil is a 10mil, aluminum foil used for reducing resonate noise, vibration, and fatigue in structures.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
V744 is a 1/8" thick, 9#, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. Norseal® V740 series has been specially formulated to provide superior performance with a reduced density foam.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | |
V748 is a 1/4" thick, 9#, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. Norseal® V740 series has been specially formulated to provide superior performance with a reduced density foam.
Loading results...
No results found for your search
Showing 15 of 15 results
Load More...