Budnick Converting ^®

3M 33+ is a 7 mil, premium, vinyl electrical tape used primarily for insulating all wire and cable splices rated up to 600 volts and 22°F.

This black, 7 mil vinyl tape is the economical solution for less demanding indoor jobs.

***Discontinued***

3M 27 is a 7.0 mil tape consisting of thermosetting rubber adhesive with a woven glass cloth backing primarily used for insulating, securing, splicing and reinforcing applications.

An 8.3 mil. thermosetable rubber-resin adhesive coated onto a glass cloth backing for many applications requiring high adhesion and a very strong conformable backing.

2255-2 is 3.5 mil, high modulous, PTFE coated film tape. It is primarily used for phase insulation, bundling end turns, anchoring breakouts and protecting air-frame wire harnesses.

166 is a 10 mil. flame retardent self-extinguishing wire harness tape used as a harness wrap tape in computers, automobiles, appliances and more.

266 is an 8.0 mil wire harness tape uniquely designed for use in wire harness applications for the appliance industry.

EV57 is a 7.0 mil, UL listed, vinyl electrical tape. It is used to splice, insulate and bind wiring harnesses.

IT7300 is a 7 mil, glass cloth used for coil wrapping & crossover insulation.

469 is a 7 mil close woven glass tape. Applications include slot and coil insulation, heat barrier tape, harness wrap and cable splicing.

4617 is a 7.5 mil, glass cloth tape used for inter-layer insulation, appliance insulation and strain relief for lead-ins.

2915-7 is a 6.7 mil, high-temperature glass cloth tape with a durable woven fiberglass backing.

2915-10 is a 10 mil, high-temperature glass cloth tape with a durable woven fiberglass backing. The old designation for this product was G540.

G561 is a 7 mil, electrical grade, fiberglass cloth tape with silicone adhesive. It is constructed to fill the requirements of most high temperature industrial needs.

G569 is a 7 mil electrical grade fiberglass tape with clear acrylic pressure sensitive adhesive on one side. It is primarily used for coil and motor applications.

ELE&WH 4140 is a 8 Mil (0.20 mm) PVC premium grade electrical insulation tape with a rubber-based adhesive. It offers all-weather performance.

ELE&WH 4100 is a 7 mil (0.178mm) PVC electrical insulation tape with a natural rubber adhesive. ELE&WH 4100 is used for wire and cable insulation, bundling, and primary splice insulation at no more than 600V. It is non-flame retardant.

DUCTCLO 3880 is an 11.8mil low gloss mesh cloth tape with a natural rubber adhesive. The center length on the adhesive side of the tape has a plastic coating which creates an adhesive-free zone, or channel, for cables so they do not become gummy with adhesive residue.